|
Welcome to our website! click for Home Page or click for Site Map
|
|
home page » Stainless Steel Appliance chapter » Kobe IS123 recirc island hood details ... you are here
The world's first turbine impeller range hood, the Kobe IS123 (model IS2336SQ IS2342SQ) is now available in a recirculating ductless vent hood version with clean-able carbon filters for carbon monoxide and odor removal.
The same hood body with quality seamless construction 430 series satin finish stainless steel, this island style vent hood features four speeds, oil catchment, removable filter sets for ease of cleaning, and two high performance fans for up to 400 cfm (recirculating ductless operation performance).
Stand alone, 36 and 42 inch recirculate 'vent-free' island hood, ceiling mount, #430 commercial 18 gauge seamless stainless steel island hood.
Kobe IS123 stainless steel island hood features 6 round exhaust, two turbine impeller fans for centrifugal filtering, two easy to clean oil catchments, four 20 watt halogen lights and electronic LCD control panel.
Please note that a 20 watt halogen light puts out 320 lumens, which is equal to a 35 watt incandescent light bulb.
This charcoal filtered recirculating option has the same four speed fan control with quiet mode (250 cfm at 1.0 sone), low (320 cfm at 3.0 sone), medium (360 cfm at 4.5 sone), and high setting (400 cfm at 4.8 sone) with the recirculating kit installed.
Exhaust is blown out the top through slotted vent openings.
Cleaning of the fan blower itself is rarely addressed and is a critical factor with recirculating ductless hoods.
These centrifugal fans can be set on low speed and degreaser sprayed up into each blower.
Allow the degreased material to flow back down into the catchment and rinse parts.
This is key to odor free performance in a professional quality recirculating kitchen hood - if the blowers are dirty, the exhaust will have an odor of its own.
All Kobe hoods are metric widths rounded to inches - consult diagrams for exact sizing.
You will find this Kobe IS123 recirculating ductless stainless steel island hood to be an exceptional value and of the highest quality.
We have been very happy with their craftsmanship and customer service.
While we could retail any and all brand of stainless steel hood, we have chosen to sell only Kobe for several years now.
Unlike the big impersonal catalog companies, we sell no other for a very good reason: we firmly believe Kobe is the most dependable, easiest to maintain, by far more quiet, and the best value, so why sell another?
Their engineering is absolutely impeccable, materials and manufacturing excellent, parts always available should you ever need them, and pricing superior when compared apples to apples with any other professional quality hood on the market today.
Read more about why Kobe Range Hoods are by far the best vent hood value by clicking on this link.
|
RECIRCULATING VERSION of the IS-123 island hood & DUCTLESS IN GENERAL Recirculating versions of any hood are limited in cubic feet per minute CFM exhaust power. It is the nature of the beast, where CFMs much past 450 would effectively by-pass filtration, not slowing down much to leave more grease and odor behind. Every manufacturer offers ductless versions, but if you want professional performance ... you should naturally vent the hood outside. When you are forced to install a ductless hood, pay very close attention to your installation height (30 inch off range top maximum) and CFM rating of the hood. This particular Kobe hood can reach 400cfm with the most efficient grease and moisture removal type of fan - centrifugal turbine impeller. This IS123 recirculating version is the most professional duty choice available in ductless ceiling hoods. A big plus is the all seamless stainless steel body has clean-able centrifugal fans. Cleaning of the blower is key to odor free performance in a professional quality recirculating kitchen hood - if the fans are dirty, the exhaust will naturally have more of an odor. Just set a centrifugal blower on low speed and spray degreaser up into each fan, allow the degreased material to flow back down into the catchment, and then rinse the parts out. The other two Kobe ceiling hoods are rated at 300cfm and 420cfm with glass canopies and squirrel cage fans. |
|
|
Kobe IS-123
|
|
Price Match plus $20 ... found better advertised price online?
|
We keep all Kobe hoods in stock for quick shipment - please order online for fastest logistics
If Out of Stock, red lettered notice will appear above Add To Cart button in place of blue IN STOCK - typically ships next business day
3% cash discount for payment other than credit card - wire, cashier's check or US Postal money order
Email natural@colorado.net with Kobe model, your name, phone and shipping address for an invoice
Plus, CONTRACTORS - DESIGNERS - ARCHITECTS are eligible for a $50 Rebate with business license on file
hoods must be paid for by you (the professional) and ship to you at your business' billing address - No Exceptions - your client is not involved.
Rebate is not valid when shipping to client job site, a residence or home-business, sub-contractor or other third party address.
|
WHAT TO DO WITH SLOPED CATHEDRAL and HIGH CEILINGS It is unique to see a stainless steel duct cover extend all the way up to the face of an angled ceiling - or much past ten feet (floor to ceiling height). Cathedral sloped and tall ceilings traditionally have a wood frame 'chaseway' box that 'hangs down' for level/horizontal mounting surface for top of hood duct cover. Designers use chaseways as architectural Focus for the entire room, if not the entire house as your guests view it. Covered with stone, glass, ceiling tin, paneled or tiled, or just drywall, your vent pipe extends on through the center of the chaseway. Unless you are shooting for an industrial look, a stainless steel 'finger' unmitigated from floor to 12 foot ceiling can be an over-powering 'eye magnet'. Smaller chaseways (single 2by4 frame) are wood trimmed to match the rest of the room and/or cabinets. Do you need an economical means to extend a too-short duct cover just six inches or more? Surround the top of your duct cover with decorative wood trim, tile or molding to hide any gap. |
Kobe IS2336SQ 36 inch wide RECIRCULATING stainless steel island hood SHORT with IS123-16DC NOT adjustable height duct cover
23 inch overall height - with bottom of hood 30 inch off range top, it will reach 89" ceiling
With bottom of hood 36 inch off range top (max), it will reach 95" ceiling
was $1582* always FREE shipping! Sorry, no APO/FPO, HI, AK, PR, VI, Mexico or Canada
IN STOCK and typically ships next business day via motor freight street-side palleted delivery
*10% OFF SALE! please add to shopping cart to view your too low to show special discount pricing
Kobe IS2336SQ 36 inch wide RECIRCULATING stainless steel island hood REGULAR with IS123DC telescopic duct cover
95-5/8" up to 109-5/8" ceiling when hood is 30 inch off range top and range is 36 inch tall see spec sheet below
was $1654* always FREE shipping! Sorry, no APO/FPO, HI, AK, PR, VI, Mexico or Canada
IN STOCK and typically ships next business day via motor freight street-side palleted delivery
*10% OFF SALE! please add to shopping cart to view your too low to show special discount pricing
Kobe IS2336SQ 36 inch wide RECIRCULATING stainless steel island hood TALL with IS123-59DC telescopic duct cover
106-5/8" up to 131-3/8" ceiling when hood is 30 inch off range top and range is 36 inch tall see spec sheet below
was $1845* always FREE shipping! Sorry, no APO/FPO, HI, AK, PR, VI, Mexico or Canada
IN STOCK and typically ships next business day via motor freight street-side palleted delivery
*10% OFF SALE! please add to shopping cart to view your too low to show special discount pricing
|
This is the RECIRCULATING VERSION of the IS-123 island hood
|
Kobe IS2342SQ 42 inch wide RECIRCULATING stainless steel island hood SHORT with IS123-16DC NOT adjustable height duct cover
23 inch overall height - with bottom of hood 30 inch off range top, it will reach 89" ceiling
With bottom of hood 36 inch off range top (max), it will reach 95" ceiling
was $1799* always FREE shipping! Sorry, no APO/FPO, HI, AK, PR, VI, Mexico or Canada
IN STOCK and typically ships next business day via motor freight street-side palleted delivery
*10% OFF SALE! please add to shopping cart to view your too low to show special discount pricing
Kobe IS2342SQ 42 inch wide RECIRCULATING stainless steel island hood REGULAR with IS123DC telescopic duct cover
95-5/8" up to 109-5/8" ceiling when hood is 30 inch off range top and range is 36 inch tall see spec sheet below
was $1871* always FREE shipping! Sorry, no APO/FPO, HI, AK, PR, VI, Mexico or Canada
IN STOCK and typically ships next business day via motor freight street-side palleted delivery
*10% OFF SALE! please add to shopping cart to view your too low to show special discount pricing
Kobe IS2342SQ 42 inch wide RECIRCULATING stainless steel island hood TALL with IS123-59DC telescopic duct cover
106-5/8" up to 131-3/8" ceiling when hood is 30 inch off range top and range is 36 inch tall see spec sheet below
was $2062* always FREE shipping! Sorry, no APO/FPO, HI, AK, PR, VI, Mexico or Canada
IN STOCK and typically ships next business day via motor freight street-side palleted delivery
*10% OFF SALE! please add to shopping cart to view your too low to show special discount pricing
click here for the main chapter with other Kobe models
click here for Kobe IS-123 model hood specification sheet
click here for Kobe IS123 hood installation and operation manual
click here for the main chapter with other Kobe models
click here for Kobe IS-123 model hood specification sheet
click here for Kobe IS123 hood installation and operation manual
Warranty and Shipment of Kobe Range Hoods
Kobe range hoods are kept in stock and typically ship the next business day.
If a hood model is Out of Stock, notice is posted in bold red text above shopping cart button for that particular unit.
After your new hood is in transit, we automatically email tracking information with estimated delivery date and contact information for the trucking company.
We have always enjoyed working with Kobe and trust you too will find their customer service very helpful, should you ever need it.
And if history is any judge, you may well never need any parts or service.
Kobe engineering and construction has proven extremely reliable over the years.
The Kobe TWO YEAR manufacturer warranty, return policy, service and shipping information is posted online at: Kobe Range Hood warranty.
Kobe keeps parts in stock and reacts quickly to customer needs.
One of the high points of their warranty - and quite unique amongst hood manufacturers - is they provide on-site service calls as part of their warranty.
If need be, they will do their best to sub-contract one of your local independent appliance repair centers for a service call.
Shipping the entire unit back for repair is the last option for Kobe, not the first and only option found with most other hood manufacturers.
|
|
Please E-mail us anytime
|
PRIVACY STATEMENT - We will never release your name, contact information or purchase history to anyone!
The use of this internet site and purchase of Architerra Enterprises, Inc. (d.b.a. TheNaturalHome.com) products and services are governed by this Terms of Service Agreement and Disclaimer.
By using this internet site, you acknowledge that you have read this Terms of Service Agreement and Disclaimer and that you accept and will be bound by the terms thereof.
Copyright © 1998 - 2010 by Architerra Enterprises, Inc. All rights are reserved, please.